Brecknell PC3060, User Instructions

Page: 25 / 30

PC3060 Price Computing Scale User Instructions 25
6 Calibration
1. Turn on the scale and press and hold the TARE key during the self-test.
Display will show “Pn”.
2. Key in the PIN number to get into the scales parameter menu. The default PIN
number is 0000.
3. Press the 0 numeric key four times…
Pn - - - - is displayed.
4. Press the TARE key to enter the parameter settings.
menu unit kg is displayed.
a. If calibrating in kg, continue to step 5 .
b. If calibrating in lb, press the UNITS key until lb is shown on the
display.
5. Press the TARE key to confirm…
f0 cal is displayed.
6. Remove all weight from weighing pan and make sure STABLE indication is
visible on the display.
7. Press the TARE key to confirm…
unload is displayed.
8. Press the TARE key to confirm…
CAP loadXX is displayed.
9. If necessary, press the M+ key to select the calibration weight value and then
place the calibration weight on the weighing pan.
10. When the weight becomes stable, press the TARE key to confirm…
PASS is briefly displayed and then F0 Cal .
11. Calibration is now complete.
12. Remove calibration weight from the platform.
13. Press the ZERO key to go back to the weighing mode.
Press calibration switch to enable these settings and allow calibration to be
completed.
The calibration switch below the scale may be sealed if legally trade stamped. It
is recommended that recalibration is only carried out by a qualified technician.