AWT35-501817
AA
Page 2
1.2
Scale operation
1.
Turn on the scale, making sure the displayed reading is showing zero (0.000).
2.
If using a protective sheet or blanket on the scale pan, place this on the scale first and press the
ON/TARE
key to zero off this weight.
The display should now show (0.000).
3.
Gently place the baby on the scale pan and wait for the display reading to stabilize.
Once stable, the required stable weight reading will flash.
4.
Record the weight reading or press the
MEM
key before removing the baby from scale.
The scale returns to zero.
5.
If the
MEM
key was pressed, press it again to recall the last stable weight reading.
Scale will automatically turn off after 5 minutes if not used.
Calibration instructions for this scale, if needed, can be found at:
http://www.brecknellscales.com/doc.html
Brecknell USA
1000 Armstrong Dr.
Fairmont MN 56031
Toll free:800-637-0529
Tel:507-238-8702
Fax:507-238-8271
Email:[email protected]
http://brecknellscales.com
Brecknell UK
Foundry lane,
Smethwick, West Midlands
England, B66 2LP
Tel:+ 44 (0) 8452 466717
Fax:+44 (0) 8452 466718
Email:[email protected]
http://brecknellscales.com
