Brecknell DS 1000-LCD, Operator'S Manual

Page: 16 / 31

AWT35-100107 Rev AB 16/30
FMT
Print Out
Format
MULTPL
MULTPL
Com1 output content and format:
MULTPL = default format.
See Appendix
;
SINGLE= only displayed content and
current status will be output, it’s
compatible with NCI-SCP01;
EH-SCP = command / response mode;
SCP-12 = only displayed content and
status will be output, it’s compatible with
NCI-SCP12(NCI3835);
Eh-sp2 =
See Appendix ;
Lfuulf / ------ = special characters. Do not
use.
SINGLE
EH-SCP
SCP-12
Eh-sp2
Lfuulf
Lfuu--
Lf--lf
Lf----
--uulf
--uu--
----lf
------
USB
Port
(com2)
BAUD.RT
600
9600 Sets the baud rate of com2
1200
2400
4800
9600
19200
BYT.FMT
8N1
8N1 Sets the bits format of com2
7O1
7E1
7O2
7E2
OUT.MOD
NONE
PRT.CMD
Sets the output mode of com2:
NONE = no communication;
CONT = continuous output;
PRINT = press PRINT key for output;
CMD = via print format command only;
PRT.CMD = output with PRINT key and
print format command ( See FMT ) ;
STABLE = output when the weight stable
condition is met (See Motion settings)
Note: when set to PRINT or CMD mode,
the weighing must be in stable condition.
CONT
PRINT
CMD
PRT.CMD
STABLE