18
CP103 Thermal Printer User Instructions
4.2.9 Inverse Font
Enable or disable inverse font printing.
1.
Go to the
Testing
tab.
2.
Under the
CMD Testing
window (the top window) enter the following command
string:
1f 49 n
Where
n
is the number associated with enable or disable inverse font printing.
3.
Click on the box to the left of HEX.
4.
Click the
[SEND]
button. The typed in command string will be displayed in the
bottom window if the command was sent.
4.2.10 Line Feed
Enable or disable line feed after printing.
1.
Go to the
Testing
tab.
2.
Under the
CMD Testing
window (the top window) enter the following command
string:
1f 19 n
Where
n
is the number associated with enable or disable inverse font printing.
3.
Click on the box to the left of HEX.
4.
Click the
[SEND]
button. The typed in command string will be displayed in the
bottom window if the command was sent.
n
Description
00
disable inverse font printing (default)
01
enable inverse font printing
n
Description
00
automatically feed 2 lines after printing (default)
01
no line feed after print
