© BREATHESAFE 2021
PAGE 19
www.breathe-safe.com.au
Delivering Innovative Climate Solutions Worldwide
Controlled document:
Issue Date:
C o n t e n t s
1 USER GUIDE
1 Key Features
2 WARNING
3 CONTROLLER APPEARANCE
4 FUNCTIONS
5 OPERATING INSTRUCTIONS
5 Enter Setup Mode
6 Change Date and Time
6 Change Pressure Setpoint
6 Change ALarm Setpoint
7 Enable / Disable Buzzer
7 Change Alarm DELAY Settings
7 Change Service Reminders
8 Calibrate Zero Sensor
8 Reset Data Log
8 Test Inputs Option
9 TECHNICAL DETAILS
9 Map of Functions
11 General Arrangement
12 Connector Pinout Details
14 Installation
15 Fan Speed Control Output
15 Mounting
15 Supply Power
15 Calibration
15 Control Override
16 Data Logging Information
20 BREATHESAFE WARRANTY
21 CONTACT US
I N P R E S S T S
Controlled document:
M-0002B
Revision:
B
Issue Date:
30 August 2021
From drop down menu click
on the Edit menu funtion.
Press “Select all”
Select “Copy table”
Open blank excel document
and click on the page. Right
click to paste the copied
table.
Fields are:
date, time, motor (volts)
output, cabin pressure (Pa),
cabin
pressure preset (Pa), cabin
low pressure alarm (Pa).
EXCEL DATA INSTRUCTIONS - UNFORMATTED
Open an Excel sheet and select the first cell A-1. Press and hold down
the CTRL button on your keyboard and then press the letter V on the
keyboard.
This will paste the copied data onto that Excel sheet. Once that data
has been pasted onto the Excel sheet, on the pull-down menu click on
‘DATA’ followed by ‘Text to Columns’. On the newly opened window
select ‘Delimited’ and then click on Next.
In the next window only select the ‘Comma’ button and then click
‘Finish’. The Excel fields will update such that each piece of data is
placed in the correct columns.
The data is now ready for archiving.
DATA LOGGING FORMATS
BU No: xxxxxx (the device number unique to each unit
and used for identification - format = 000000)
Time [09:25]
Date [25/07/12]
Pressure 32.8 (Pascals) as an example.
Alarm type :
0 = no alarm
1 = low pressure alarm
2 = window open
3 = door open
