Product Description
Symbols Used in the Menu
Checking the Vivo Before Use
1.
Connect a cleaned or new patient circuit to the Vivo.
2.
Connect the Vivo to the mains supply.
3.
Switch on the Vivo main power using the On/Off button
on the side panel.
4.
Check patient settings.
5.
Press the Start/Stop button on the front panel.
6.
Put on the mask and adjust it’s fit.
7.
Ensure that the settings are adjusted as prescribed.
The Vivo is ready for use.
Viewing the Settings and Alarm History
Vivo30/40
User Quick Reference Guide
Doc. 004448 En-Uk A-1
N
O
. I
TEM
N
O
. I
TEM
1
Air inlet
6
AC inlet
2
Rear lid lock
7
On/Off
3
Air outlet
8
External DC inlet
4
Memory card slot
9
Data connection
5
HA 20 humidifier
10
Internal battery or
base
S
YMBOL
D
ESCRIPTION
U
NIT
Battery level
Alarm time active
Hour : Minute
HA 20 humidifier active
1 to 9, Off
Ramp active
Minute
Panel locked (home mode)
On, Off
Panel locked (home mode)
by the Breas Vivo PC
software
On, Off
1
2
3
4
5
6
7
8
9
10
To show settings:
Enter the main screen and press up
button for 5 seconds.
To show alarm history and alarm
settings:
Enter main screen and press down
button for 5 seconds.
Breas Medical AB, Företagsvägen
1
,
SE-
435 33
Mölnlycke, Sweden,
Phone: +
46 31 86 88 00
, Fax: +
46 31 86 88 10
,
[email protected]
Find your local distributor at
www.breas.com
ENGLISH
