![background image](http://html1.mh-extra.com/html/breas/vivo-3/vivo-3_clinician-manual_2806331064.webp)
2
Make sure that nothing can block
the patient air inlet at the back of
the Vivo 3, such as a curtain etc.
5.3
Connecting the Vivo 3 to Power Supply
This chapter describes how to connect a Breas power supply.
WARNING!
Read the chapter 2.2
, page 19 carefully to make
sure all conditions are considered and met.
CAUTION!
Mains isolation is provided by the approved AC/DC and DC/DC adapters. The ven-
tilator must only be powered by the approved AC/DC or DC/DC adapter (acces-
sory) listed in 10
a
b
1
Plug the DC plug by turning it into
the power port at the back of the
Vivo 3.
2
Make sure that the mains cord is connected to the power adapter (a).
3
Turn the DC plug clockwise 90 degrees (b).
4
a) If using mains power, connect the AC plug to the mains supply outlet:
Vivo 3 Clinician
’
s Manual
Doc. 007232 Y-2
Summary of Contents for Vivo 3
