BRILLIANT AG hereby declares that the remote control (Model: TP12-B92) coincides with the essential requirements
and other relevant provisions of Directive 2014/53/EU. A copy of the signed and dated Declaration of Conformity is
available on request via Brilliant AG; Brilliantstr. 1, D-27442 Gnarrenburg.
Instruction:
1. Separate coding function:
Cut off the electricity then press and holding down the separate group switch (A/B/C ),
when LED light on the remote control starts flashing regularly, turn on the electricity,
when the lamp stops flashing, coding was successfull.
2. Coding erasing:
Same as coding, cut off the electricity then long press the separate group switch (A/B/C ),
when LED light on the remote control lights up permanently, turn on the electricity,
when the lamp starts flashing, it means coding erasing successfully.
3. ABC: means three groups, these buttons control on/off of their own groups.
4. Master on/off switch: control on/off for all groups
5. Saving: long press for 3 scends to save the current light.
6. Dimming: switch between WW/NW/CW
7. Night light function
ON
Increase brightness
Lower CCT
Saving
Dimming
A group
B group
C group
OFF
Increase CTT
Lower brightness
Night light
Bluetooth Loudspeaker Instruction Mirius
To establish a connection between bluetooth loudspeaker and your device please follow below steps:
1. Turn ON the lighting fixture
2. Open Bluetooth Settings on your tablet/smartphone or other device and turn ON as well
3. Search for close by devices and connect with the device called „JAZZ“
4. Please enter pairing code „123456“
5. After successful pairing you can play music from your device and change volume of speaker from your
device at loudspeaker directly.
6. To delete the pairing please check instruction manual of your bluetooth device.
Summary of Contents for Mirius HK17230 Series
Page 1: ...Mirius HK17230 05 18 ...
