11.
On the distance tube (11) assemble the
gear (3)
12.
On the lower support of the winch (9)
mount the motor (20) with the two self-
tapping screws (5) and the drive pinion
(15)
13.
Assemble the superior support of the
winch (17) (full gear) on the lower
support (9) locking it with the remaining
two screws 3x30 (13)
14.
Put the drum (18) on the hexagon mast (14) and with hand try
rotating the winch, if it is too "hard" to loosen the screws
3x30 (13) and try again until the winch spinning freely hand
15.
Insert the potentiometer into place with the nut
16.
Install the pinion of the potentiometer (16) on mast and
tighten the bolt locking potentiometer same
Summary of Contents for BRC802
Page 1: ...WINCH ASSEMBLY BRC802 ...
Page 2: ...KIT INCLUDES ...