3
RU
CONVECTION HEATER
BR4882
Convection fan heater is intended for the use as an
additional heating unit, for heating of a small amenity
room or its certain area.
DESCRIPTION
1. Hot air output
2. Display
3. Control panel
4. Front panel
5. Power switch «ON/OFF»
6. Feet (2 pcs.)
Control panel
7.
On/Off button «
»
8.
Power selection button «
»
9.
Open window detection button
« »
10.
Time/timer setting button
« »
11.
Operating modes programming button «ПРОГ
»
12.
Default program selection button «РЕЖИМ
»
13.
Program setting button «
» или «
»
Display
14. Remote control signal receiver
15. Icon for max power operation «
»
16. Icon for low power operation «
»
EN
ATTENTION!
– Portable convection fan heaters are intended for the
use as a supplementary source of heat, for heating a
small amenity room or its certain area. They are not
intended for the use as main heating units.
– For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA. To install an RCD,
contact an electrical technician.
17. Timer operation icon « »
18. Temperature icon « »
19. Frost Protection icon «
»
20. Open Window Detection icon « »
21.
Numeric and alphabetic characters for operating
modes
22. Remote control
23.
On/off button
« »
24.
Power selection button
« »
25.
Open window detection button
« »
26.
Time/timer setting button
« »
27.
Operating modes programming button «ПРОГ
»
28.
Default program selection button «РЕЖИМ
»
29.
Program setting button «
» или «
»
30. Battery holder
