BRAYER BR4851, Instruction Manual

Page: 10 / 44

10 EN
PROTECTION FROM DROPPING
• If the fan heater accidentally falls or tilts too much,
the fall protection device will switch on and the fan
heater will be switched off.
• Set the fan heater into vertical position, and the unit
will resume operation.
• Note: — place the fan-heater on a flat dry and steady
surface to prevent it from dropping.
CLEANING AND MAINTENANCE
• Before cleaning the fan heater set the power switch
(5) to the position «0», and make sure that the power
plug is not inserted into the mains socket.
• Wipe the fan heater body (4) with a slightly damp
cloth and then wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan heater.
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan heater body.
• To clean the air grids, use a vacuum cleaner with a
corresponding attachment.
STORAGE
• After cleaning put the fan heater away for storage
in a dry cool place away from children and disabled
persons.
• Before using the fan heater next time, it is
recommended to check the unit operability and
integrity of the power cord isolation and the power
cord plug.
DELIVERY SET
1. Fan heater — 1 pc.
2. Remote control — 1 pc.
3. Instruction manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Power supply: 220-240 V, ~ 50/60 Hz
• Rated input power: 1500 W
• Heating area: 15 m²
• Remote control: 3 V — «CR2025» battery (not
included)
RECYCLING
To prevent possible damage to the
environment or harm to the health of
people by uncontrolled waste disposal,
after expiration of the service life of the
unit or the batteries (if included), do not
discard them with usual household waste,
take the unit and the batteries to specialized stations for
further recycling.
The waste generated during the disposal of products
is subject to mandatory collection and consequent
disposal in the prescribed manner.