6
EN
HAIR STRAIGHTENING
•
Place the hair straightener on a flat steady heat-
resistant surface. Make sure that the heating plates
and the outer surfaces do not touch fusible and
inflammable objects.
•
Use the unit on healthy undyed and not permed hair.
•
If your hair is dyed or was permed, use the hair
straightener rarely.
•
Before straightening wash your hair with shampoo,
wipe it with a towel, dry with a hairdryer and comb
your hair.
•
Press the heating plates (4) together and press the
lock (1) «
».
•
Put the hair straightener on a flat steady and heat-
resistant surface.
•
Insert the power plug into the mains socket.
•
Switch the hair straightener on by set the switch (2)
to the «ON» position, and the indicator light (3) will
light up.
•
Notes:
- when switching the unit on for the first time, a
smell from the heating element can appear, this is
normal and it is not covered by warranty.
•
Divide the smoothly combed hair into locks about 4-5
cm wide.
•
Place a lock of hair between the heating plates (4).
•
Press the heating plates (4) with slight effort and
glide them till the end of the hair lock.
WARNING:
do not leave the heating plate at one part of
the hair lock for longer than 2 seconds.
• Straighten all hair locks.
•
Cool your hair down before final styling or applying
hair spray.
•
Avoid contact of heated surfaces of the hair
straightener with your face, neck and other parts of
your body.
•
After you finish using the unit set the switch (2) to the
«OFF» position.
•
Note:
- always switch the unit off and unplug it when
you’re not using it.
- never leave the hair straightener connected to the
mains unattended.
CLEANING AND MAINTENANCE
• B
efore cleaning switch the hair straightener off,
unplug it and let it cool down completely.
•
Do not immerse the hair straightener, the power cord
and the plug into water or other liquids.
•
Do not use abrasives and solvents to clean the hair
straightener body and the heating plates (4).
•
Wipe the hair straightener with a soft, slightly damp
cloth and
then wipe it dry.
STORAGE
•
Let the unit cool down completely and clean it before
taking away for storage.
•
Never wind the power cord around the unit body, as it
can damage the cord or the unit body.
•
When storing press the heating plates (4) together
and move the lock (1) «
».
