7
EN
OVERHEATING PROTECTION
• The overheating protection system switches the
hairdryer off if the outgoing air temperature is above
the limit.
•
If the hairdryer is switched off during operation, set
the switch (1) to the position «0», unplug the unit
and make sure that the air inlets and outlets are
unblocked.
• Let the unit cool down for 5-10 minutes and then
switch it on again. Do not block the air inlets during
operation of the hot air styler and
• avoid getting of hair into the air inlet grid (4).
CLEANING AND MAINTENANCE
• The hairdryer is intended for household use only.
• Set the switch (1) to the «0» position, disconnect the
hairdryer from the mains and let it cool down.
• Wipe the unit body (2) with a slightly damp cloth,
and then wipe it dry.
• Clean the air inlet grid (4) with a brush.
• Do not immerse the unit into water or any other
liquids.
• Do not use abrasives and solvents to clean the
nozzle (3) and the unit body (2).
STORAGE
• Disconnect the unit from the mains and clean it.
• Never wind the power cord around the hairdryer
ATTENTION!
Do not use the unit near water in the
bathrooms, showers, swimming pools etc.
body (2), as it can lead to its damage or damage of
the unit body (2).
• A hanging loop (6) you can hang the hairdryer on is
provided for the ease of storage of the unit, given
that no water will get on it.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
DELIVERY SET
1. Hairdryer — 1 pc.
2. Nozzle — 1 pc.
3. Manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Supply voltage: 220-240 V, ~ 50 Hz
• Rated input power: 1800 W