BRAYER BR2004, Instruction Manual, Page: 7 / 48

7 EN
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains.
• Clean the grill body surface with a slightly damp cloth
and then wipe it dry.
• Move the lock (5), take the handle (3) and open the
grill.
• Remove the tray (2).
• Wash the frying plates and the tray (2) with warm
water and neutral detergent, rinse them and wipe dry.
• Place the grill keeping at least a 20 cm gap between
the grill body and the walls and 60 cm of space
above the grill.
• Use the grill on a flat steady surface, away from
sources of moisture,
• heat and open flame with free access to the mains
socket.
• Do not place and do not use the grill near highly
inflammable objects
• or liquids and objects subject to thermal deformation.
• Use the unit in places with proper ventilation.
• Make sure that the tray (2) is installed to its place.
• Before using the grill open it and oil the frying plates
slightly.
• Close the grill.
• Plug the power cord into an electrical outlet, you will
hear a beep and the display backlight will turn blue
(Pic. 1).
Note: if no actions are performed, the display
illumination will go out in 1 minute.
• To switch the grill on, press and hold the button (10)
« » for 2 seconds, the light indicator (11) will light
up, and the time digits (7) «--:--» will be flashing on
the display. Press the button (12) «Grill», the display
illumination will light up orange. The heating elements
will switch on and the temperature digits (8) 235°С
will appear (pic. 2).
• After about 5-6 minutes turn the grill off by pressing
and holding the « » button (10), unplug the grill
and wait until it cools down completely. Take the
handle (3), open the grill and remove the remaining
vegetable oil from the frying plates with a paper
towel.
• The grill is ready to use.