BRAYER BR1801, Instruction Manual, Page: 6 / 40

6 EN
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages; if the unit is damaged,
do not use it.
• Clean the weighing platform (1) with a slightly damp
cloth, and then wipe it dry (if there is a protective film
on the platform, remove it).
USING THE SCALE
BATTERY INSTALLATION
To avoid personal injury or damage to the unit,
prevent the batteries from leaking and follow the
instructions below:
- use only the «AAA» battery in the kitchen scale;
- insert the battery strictly following the polarity;
- timely replace the batteries; do not use old and
new batteries at the same time;
- do not recharge the battery;
- if the kitchen scale is not used for a long time,
remove the battery from the battery compartment;
- hand the discharged battery over to a specialized
collection point for its further disposal.
• Open the battery compartment lid (5) and insert a
«CR-2032» battery (supplied with the unit), strictly
following the polarity.
• Install the battery compartment lid (5) back to its
place.
Notes: If there is an isolation insert, open the battery
compartment lid (5), remove the isolation insert and
install the battery compartment lid (5) back to its place.
BATTERY REPLACEMENT
• When the battery is low, the symbol « » will
appear on the display (4).
• Before the scale switch off due to the low battery, the
symbol «LO» will appear on the display (4). Open the
battery compartment lid (5), replace the discharged
battery with a new «AAA» battery, strictly following
the polarity, close the battery compartment lid (5).
• If the kitchen scale is not used for a long time,
remove the battery from the battery compartment.
SWITCHING THE KITCHEN SCALE ON
• Place the kitchen scale on a flat, dry and stable
surface.
• Avoid exposing the infrared sensors (3) to sunlight to
avoid false alarms.
• Position your hand on the platform for weighing (1),
as shown in the picture 2, make a quick movement of