BRAYER BR1260, Instruction Manual, Page: 4 / 21

6 7 en en
• Read the safety measures and operating
recommendations.
• examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to
the specifications of your mains. When the unit is
powered from 60 Hz frequency mains, no additional
actions are necessary.
• Wash the bowls (1, 5) and the lids (4) with warm
water and neutral detergent, rinse and dry.
• Wash the knife block (only from the knives side) (2)
with warm water and neutral detergent, rinse and dry.
• The cutting edges of the knife block (2) are sharp
and can be dangerous, handle the knife block (2)
carefully.
• Clean the motor unit body (3) with a soft, slightly
damp cloth, and then wipe it dry.
• do not immerse the unit, the power cord and the
power plug of the unit into water or other liquids.
USInG THe BLenDeR
• The blender is intended for chopping products,
mixing different ingredients and making cocktails.
• note: — when using the unit for the first time, a
foreign smell from the electric motor can appear —
this is normal and it is not covered by warranty.
• Place the blender on a flat dry and steady surface.
• notes:
- the blender is not intended for crushing hard and
frozen food, chopping meat and meat products.
- the amount of the processed products should not
exceed 2/3 of the bowl (1) capacity.
- before starting to chop/mix, we recommend to
peel fruit, remove stones, and cut fruit into 1х1 cm
cubes.
• Put the necessary ingredients into the bowl (1).
• Install the knife block (2) on the bowl (1) and turn it
clockwise.
• Once again make sure that the knife block (2) is
installed correctly.
• Insert the power plug into the socket.
• Turn the bowl (1) upside down, insert the knife block
(2) in the motor unit (3) and press on the bowl (1)
downwards, the blender will be switched on. Release
the bowl (1), the blender will be switched off.
• You can fix the bowl (1), to do this, insert the knife
block (2) in the motor unit (3) and turn the bowl (1)
clockwise until bumping; the blender will be switched
on. After processing the product turn the bowl (1)
counterclockwise and remove it from the motor unit
(3).
STORAGe
• Clean the unit before taking it away for storage.
• keep the unit in a dry cool place out of reach of
children and disabled persons.
DeLIVeRY SeT
1. Tabletop blender — 1 pc.
2. Thermos container — 1 pc.
3. Travel bottle — 1 pc.
4. knife block — 1 pc.
5. Lid — 1 pc.
6. Manual — 1 pc.
TeCHnICAL SPeCIFICATIOnS
• Supply voltage: 220-240 V, ~50-60 Hz
• Rated input power: 300 W
• Thermos container: — 0.4 l
• Travel bottle — 0.6 l
• Maximal operation time: — 2 minutes
ATTenTIOn!
Continuous operation time of the blender should not
exceed 2 minutes, after that make at least 1 minute
break.
• note: — if food processing is hindered, add some
water, liquor or juice etc. into the blender bowl (1).
• Unplug the unit after you finish using it.
• Pour the processed products from the bottle (1)
into the thermos container lid (4) and put it on the
thermos container (5) turning clockwise.
• Wash the bottle (1) and the knife block (2).
ATTenTIOn: The knives (2) are sharp and
dangerous. Handle the knives (5) carefully.
CLeAnInG AnD MAInTenAnCe
• Unplug the blender after you finish using it.
• Wash the bowls (1, 5) and the lids (4) with warm
water and neutral detergent, rinse and dry.
• Wash the knife block (2) (only from the knives side)
with warm water and neutral detergent, rinse and dry.
• Clean the motor unit body (3) with a soft, slightly
damp cloth, and then wipe it dry.
• do not use abrasives and solvents to clean the motor
unit body (3) and the removable parts.
• do not immerse the motor unit body (3) into water or
any other liquids.