9
EN
• Check the water level in the thermopot using the
scale (1).
•
Timely refill the thermopot.
HOT WATER MAINTENANCE TEMPERATURE
SELECTION
•
You can select one of five presets of hot water
temperature maintenance.
• To select the hot water maintenance temperature
press the button (21) «Selection of С°», you can
select the hot water maintenance temperature of
«95-85-65-55-45» degrees.
• Recommended water temperature for brewing tea
and making other beverages:
• - «45» - water temperature for making powdered
baby milk
• - «55» - brewing white tea
• - «65» - red or herbal tea
•
- «85» - green or yellow tea, brewing coffee
• - «95» - black tea
• The preset keep warm temperature is shown by the
corresponding indicators (19).
•
If the water temperature goes significantly below
the preset temperature (for example, if you added
cold water), the boiling mode will switch on and the
indicator (14) «Boiling» will light up.
• You can switch the reboiling mode on by pressing the
button (13) «Reboiling», the indicator (14) «Boiling»
will light up. After water boiling you will hear a sound
signal and the keep warm mode will switch on, the
keep warm indicator (19) «85» will light up. The water
temperature 85°С is set by default.
•
To switch the thermopot off disconnect the power
cord (22) plug from the mains socket.
CLEANING AND MAINTENANCE
• Before cleaning the thermopot unplug it (22), open
the lid (5) and wait until the thermopot cools down
completely.
• Always drain the remaining water from the thermopot
flask, to do this remove the lid (5).
• Before removing the lid (5) slightly open it at the
angle of approximately 45°, and pull the lid (5)
towards the control panel (4) (pic. 2).
• Carefully tilt the thermopot to drain the remaining
water (pic. 7).
• Install the lid (5) to its place; to do this, set the lid
(5) at the angle of approximately 45° and insert
the lid (5) to its installation place; before using the
thermopot make sure that the lid (5) is fixed properly.
• Clean the outer surface of the thermopot body (10)
with a slightly damp cloth and then wipe it dry.
• Use neutral detergents to remove dirt, do not use
metal brushes, abrasives and solvents.
• Do not immerse the thermopot and the power cord
(22) into water or other liquids.
• Do not put the thermopot in a dishwashing machine.