8
EN
HEATING THE WATER UP TO PRESET
TEMPERATURE
• You can warm up water up to the required temperature.
For making different tea varieties the special water
temperature is required.
•
It is recommended to use the water temperature 70 °С
for white and green tea, 80 °С for instant coffee, 90-100
°C for black tea.
• Press one of the buttons (9) for temperature selection
40 °C ,70 °C, 85 °C, 100 °C and press the button
illumination will light up blue and start flashing, the
«ON/OFF» button (3) illumination will light red, the
heating element will switch on and the water will be
heated up to the preset temperature.
• When the preset temperature level is reached, you will
hear sound signals, the buttons illumination will go out.
•
If it is necessary to switch the heating function off, press
the On/Off button (3) «ON/OFF».
KEEP WARM FUNCTION
Notes:
- the function allows to maintain the preset water
temperature within 2 hours without reboiling. At
the end of this time keep warm mode switches off
automatically.
- operating mode of warm keeping is periodical, if
the water temperature in the kettle flask cools down
by 5 degrees, the boiling mode will switch on, and
after boiling the water will cool down to the preset
temperature.
• Press one of the buttons (9) for temperature selection
40 °C ,70 °C, 85 °C , the button illumination will light up
blue and start flashing. Press the «ON/OFF» button (3),
the «ON/OFF» button (3) illumination will light up red
and the heating element will switch on. Press the keep
warm mode button (1) «KEEP WARM», the button (1)
«KEEP WARM» will light up blue.
• After the water boils, you will hear a sound signal and
the kettle will switch to the keep warm mode, if the water
temperature drops by 5 degrees, the reboiling will start
and after that the keep warm mode will switch on.
Note:
when you set the water temperature maintaining
at 100°С, the reboiling will start at the water temperature
85°С.
•
If it is necessary to switch the heating function off, press
the keep warm mode (1) «KEEP WARM» On/Off button.
Notes:
- if you remove the kettle from the base for the time
less than 1 minute, the keep warm mode will stay on.
- if the kettle is removed for a longer time, you will hear
a sound signal, and heating mode will be switched off.
-
in the keep warm mode 100 °С it is inactive.
• If you accidentally switched the kettle on, but the water
level appeared to be below the minimal mark, the
automatic thermal switch will be on and the kettle will
switch off. In this case take the kettle from the base
(4) and let it cool down for 10-15 minutes, then fill the
