IMPORTANT SAFEGUARDS
Read Instruction Manual Before Use
When using electrical appliances, basic safety precautions should always be
followed, including the following:
9.
Do not use outdoors.
10. Do not let cord hang over edge of table
or counter or touch hot surfaces.
11. Keep hands and utensils away from
moving blades or discs while
processing food to reduce the risk of
severe injury to persons or damage to
the food processor. A scraper may be
used but must be used only when the
food processor is not running.
12. Blades are sharp. Handle carefully.
When handling the chopper blades
always hold it by the plastic hub.
13. To reduce the risk of injury, never
place cutting blades or discs on the
base without first putting bowl properly
in place.
14. Be certain cover is securely locked in
place before operating appliance.
15. Never feed food by hand. Always use
food pusher.
16. Do not attempt to by-pass the cover
interlock mechanism.
17. Always operate food processor with
the cover in place.
18. Always operate the blender with the
cover in place.
19. When blending hot liquids, remove the
center piece of the two-piece blender
cover.
CLEANING & MAINTENANCE
CAUTION:
Make sure that the unit is unplugged from power source and control
button is on “OFF” before inserting or removing any attachments and
before cleaning.
Re-settable Thermal Safety
Device
Your Bravetti Platinum Pro Food
Processing Center has been designed
with a unique safety system which
prevents damage to the unit’s motor
and drive system, should you
inadvertently overload your appliance.
The safety system will automatically cut
the electric power to the appliance
when the device senses an overload or
excessive temperature in the motor or
drive system. Should this occur during
use and the appliance stops
functioning, following is the re-setting
procedure:
1.
Turn the “ON/OFF” speed control
to the “OFF” position
2.
Unplug the unit from the wall
receptacle.
3.
Remove and empty the processor
bowl. Ensure that no food is
jamming the cutting blades or
attachments.
4.
Allow the appliance to cool down
for a minimum of 30 minutes.
5.
Re-install the processor bowl and
re-plug appliance in the wall outlet.
6.
Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the “ON/OFF”
speed control to the “OFF” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours. After
this time has passed, repeat the
restart procedure, steps 5 and 6
above.
1. Read all instructions before using the
appliance. It is suggested that you
keep these instructions in a safe
place for future reference.
2. Your voltage must correspond to the
voltage printed on the bottom of the
appliance.
3. To protect against electrical shock,
do not immerse the motor housing
(base), cord, or plug in water or other
liquid.
4. Close supervision is necessary when
the appliance is used by or near
children.
5. Unplug appliance from outlet when
not in use, before putting on or taking
off parts and before cleaning.
6. Avoid touching moving parts at all
times.
7. Do not operate the appliance with a
damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to
EURO-PRO
Operating LLC
for examination,
repair, electrical or mechanical
adjustment.
8. The use of attachments including
canning jars not recommended by
the manufacturer may cause fire,
electric shock or injury to persons.
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
REV. 01/05A
1
12