9
OPERATING INSTRUCTIONS cont.
Warning:
Always remove the plug
from the wall socket before cleaning.
Allow the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
control panel, cord or plug in water or
any other liquid.
•
Follow the cleaning instructions on
page 4. (Before using for the First
Time)
•
Never immerse the control panel, cord
or plug in water or any other liquid.
•
Do not place the control panel, cord or
plug in the dishwasher.
•
Clean the control panel only with a
damp cloth.
•
The oil container, frying basket, lid
cover and filter can be washed in the
dishwasher.
•
The body of the deep fryer can be
washed in warm soapy water.
Do not
put the body of the deep fryer in the
dishwasher.
Cleaning Instructions
Connecting the Detachable
Power Supply Cord
Your
Bravetti Platinum Pro
Deep Fryer
has been specifically designed with your
safety in mind.
Bravetti Platinum Pro
has incorporated a unique detachable
power supply cord. This power supply
cord cord is designed to “Break Away”
from the fryer body in the event that the
supply cord is inadvertently pulled. This
is intended to prevent the tipping of the
appliance and hazardous spillage of hot
oil.
The female receptacle portion of the
power supply cord is permanently
attached to the rear of the the control
panel. To connect the male power cord
plug to the female receptacle on the
appliance, orient the male plug so that it
mates with the female receptacle. The
male plug can only be inserted one way.
If the male plug will not go into the
receptacle on the appliance, rotate the
male plug 180° and insert again.
IMPORTANT: Should the male plug
become detached from the appliance
during use, it is important to:
1. Unplug the power cord from the wall
outlet.
2. Turn off the appliance at the control
panel.
3. Re-attach the power cord to the
appliance.
4. Re-connect to power outlet.
5. Turn the appliance back on.
IMPORTANT
Helpful Hints
Your deep fryer is equipped with a special Auto-Off Safety Feature. The
heating element will shut off when the timer stops.
You can re-set the deep fryer to 320 degrees by simply pressing the re-set
button located just below the thermostat on the front panel.
The temperature control allows you to set the desired temperature for each
recipe. Once the temperature is achieved, the ready light will turn on. This is
the point to set your timer. Once the time has elapsed, the element will shut
off and the oil begin to cool down. If you want to do another recipe, simply
press the re-set button, set your temperature and wait for the ready light.
Once illuminated, then set the timer.
If you would like to use the fryer continuously for multiple batches, do not
set the timer. Simply set the desired temperature, wait for the ready light
and begin!
OPERATING INSTRUCTIONS cont.
10
