11
Specifications
BRAVE
800-350-8739
www.braveproducts.com
CAUTION
:
Always use the factory supplied wash hose with your machine. Do not substitute other
hoses as a potential safety problem may develop.
CAUTION:
If machine has been exposed to sub-freezing temperatures, it must be
thoroughly warmed to above freezing before operating
. Failure to warm machine can
cause damage to the pump packings and other components.
¨
MAINTENANCE
Refer to the MACHINE
MAINTENANCE
SCHEDULE
for any maintenance
to be performed before operation of this machine.
¨
WATER
SUPPLY
:
The water supply must be at least 2 Gallon / 7.5 Liter to 5 gallon/ 18.9 Liter
and a minimum water inlet pressure of 10 PSI/ 0.68 BAR.
♦
CHEMICAL TANK
:
Measure the amount of chemical and mix with water to fill the 5 gallon/
18.9 Liter gallon tank.
Mix chemicals per the chemical manufacturer’s printed
directions. Follow all mixing, handling, application, and disposal instructions.
Wear gloves, boots, goggles, and protective clothing appropriate for the
chemical being used.
♦
CAUTION: RUNNING TANK EMPTY WITH PUMP RUNNING WILL DAMAGE
THE PUMP.
WARNING:
Chemical Burn Hazard. Chemicals could cause burns resulting in death or seri-
ous injury, and/or property damage.
ADVERTENCIA:
Riesgo de Quemadura Químico. Los productos químicos podrían causar
quemaduras que causan la herida de muerte o seria, y/o el daño a la propiedad.
AVERTISSEMENT:
Le Produit chimique Brûle le Hasard. Les produits chimiques pourraient
provoquer brûle la conséquence dans la blessure mortelle ou sérieuse, et-ou le dommage
de propriété.
Chemicals
Mix chemicals per the chemical manufacturer’s printed directions. Follow all mixing,
handling, application, and disposal instructions. Wear gloves, boots, goggles, and
protective clothing appropriate for the chemical being used.
PRE-OPERATIONAL INSTRUCTIONS
PRE START-UP
1.
The first time the machine is operated, after repairs have been
made, or if the machine has set for a period of time (30 days or
more) follow the following procedures.
A. Flush the machine per instructions in
MACHINE
MAINTENANCE
.
B. Check position of water incoming ball valve.
