Brave BRI7000IER, Operating Instructions And Owner'S Manual

Page: 26 / 60

BRAVE GENERATOR PRODUCT SUPPORT 1-888-980-4938 26
Operating Instructions
& Owner’s Manual
ELECTRIC-START MODELS
Your BRI7000IER is Electric Start Only.
4. Using provided key, turn the ignition switch to the “ON” position. Rotate the key one more position
to the “START” position in order to engage the starting motor. Hold key switch in the “START” position
until engine starts, for NO MORE than 10 engine rotations. If the engine does NOT start, repeat
procedures beginning with Step One (1).
REMOTE START MODELS
1. Place the remote start switch on the control panel in the “ON” position.
CAUTION: Leaving the remote start switch in the “ON” position for more than six
hours without operation will result in a dead battery and the inability to start the unit
with the key switch or the remote start.
2. Double-click and hold the “ON” button (marked with a lightning bolt) on the
remote start until the engine starts.
NOTE (all models): If generator does not start within three pulls, check the crankcase
oil level. The engine’s “Low Oil Shutdown Protection” circuit may be activated and
preventing the engine from starting.
NOTE (all models): Unit is equipped with an Automatic Choke.
Overload
Reset