Brauniger iq basis, Operating Instructions Manual, Page: 10 / 16

The display will indicate the speed of the flywheel sensor, which is avai-
lable as an option, and is inserted into the socket on the right side.
A possible speed error (caused by a different positioning) can be
compensated by using Set Mode No. 10.
Repeated pressing of the key makes it possible to select between
“Off - Quiet - Loud”. The sound that can be heard while pressing this key,
shows the selected level. If only a short confirming bleep is heard, then
the audio has been switched off.
Descending sound
Pressing the key switches the sink sound on or off. The moment the sink
sound is activated you can see also it’s cut in point on the variometer
scale.
Changing this point is done in Set Mode No. 2
If the flywheel sensor indicates a speed below the value selected by the
user which is higher than 15 km/h [10 mph], then a loud quickly repea-
ting sound will be heard.
Changing the setting is carried out in Set Mode No. 3.
If a value which is 15 km/h[10 mph] is entered, then the
Stall Alarm is disabled.
The stall alarm is a great help for determining the opportune moment for
pushing out the controlbar during critical landings.
The time appears in the display area after the unit is switched on.
Setting the correct time and date is done in Set Mode, using No. 5 for
the time, No. 6 for the date.
change speed units in
Set-Mode No.9
Speed
Hang glider-Sensor
Paraglider-Sensor
Acoustics and volume
Date and time
å å
Stall-alarm
8
GB