General Guidance
Safety information
•
It is recommended that Solo floor anchors are installed only by an experienced technician/vehicle
converter.
•
Do not make any alterations to the Solo floor anchors.
•
Do not install the floor anchors to unsound metal, wood, or plastic structures without additional and
suitable reinforcement.
•
These floor anchors meet the requirements of ISO 10542 & SAE J2249. Testing was conducted to the
same configuration to that recommended by this guide, any deviation from the recommendation is
the responsibility of the installer.
•
The installer is responsible for ensuring that the fitting meets all applicable regulations.
If in doubt about the method of installation or use please contact BraunAbility.
•
Ensure that the wheelchair is correctly maintained and that the settings of any adjustable parts are
made according to ‘Instructions for Use in Transport’.
•
Whenever possible remove any items of luggage etc that may be attached to the wheelchair
and secure or store separately during transport in order to reduce the potential for injury to other
passengers travelling in the vehicle.
•
Extra care must be exercised when using vehicle boarding aids such as passenger lifts or ramps during
the loading process. Refer to ‘Instructions For Use’ for information on safe slopes.
4
S10
