Operating HAL
Fit and use
1.
Before locating the seat into the rail, unlock HAL, by pressing the silver trigger
(Fig 6) and then pull the handle fully back (Fig 7).
2. To locate the seat in the rail, align both HAL wheels into the rail, tilt the seat
backwards slightly and wheel it along the rail to the right location. Once this is
found, lower the seat into the rail gently push it forwards or backwards until it
is located into the rail.
3. To lock the seat into the rail, push the handle forward to the upright position
(Fig 8) until you hear it click.
Anti-tamper device
The anti-tamper device, which is supplied with HAL, is an optional accessory.
1.
Should you choose to use this device during transportation, just clip it on to
the silver trigger, making sure it is safely fitted (Fig 9).
2. To remove the device, simply push it sideways to release the silver trigger.
Stow away securely.
Removing seat from rail
1.
To release the seat from the rail,
unlock HAL, by pushing handle
forward while pressing the silver
trigger (Fig 6), then pulling the
handle fully back (Fig 7).
2. Tip the seat backwards and
remove from the rail.
10
HAL2, HAL3
Summary of Contents for HAL2
