21
Oral-B ProWhite
features a special polishing cup to
naturally whiten your teeth. Please
note that children under 12 years old
should not use the Oral-B ProWhite
brush head.
Oral-B Interdental
cleans between teeth, around bridges,
crowns and implants. Position the
brush head at a 45 degree angle to
the gumline. Slowly guide it along the
gumline, pausing between each tooth.
Oral-B Sensitive
features an extra soft bristle structure
that is gentle on teeth and gums.
Our
sweeping «Trizone» brush head
can be used
with all common brushing techniques.
Oral-B TriZone brush head
features triple zone cleaning action
for outstanding plaque removal, even
in between teeth.
Oral-B brush heads feature light blue INDICATOR
®
bristles to help you monitor brush head replace-
ment need. With thorough brushing, twice a day
for two minutes, the blue color will fade halfway
approximately within 3 months, indicating the need
to exchange your brush head. If the bristles splay
before the color recedes, you may exert too much
pressure on teeth and gums.
We do not recommend using the Oral-B FlossAction
or Oral-B ProWhite brush head with braces. You
may use the Oral-B Ortho brush head, specifically
designed to clean around braces and wires.
Synchronizing your
toothbrush
(depending on model)
To avoid interference of display messages when
using more than one Oral-B toothbrush with radio
transmission and SmartGuide in the same house-
hold, you need to assign the handles to their
respective SmartGuide.
You can synchronize a maximum of 2 handles with
one SmartGuide. To do so, push the «h/min» button
in the battery compartment for at least 3 seconds.
The SmartGuide shows «L---». Turn on your handle
to start the synchronization process. It is finished
when «L-1-» is displayed. Turn off the handle.
To assign a second handle to the same SmartGuide
turn on the other handle until «L-2-» is displayed.
After having synchronized the second handle, «Full»
will be displayed. Exit the synchronization mode by
pressing the «h/min» or «set» button, otherwise it
will end automatically after 30 seconds.
Connecting your toothbrush
to your Smart Phone
Download the Oral-B™ app for free from App
Store
(SM)
or Google Play™. The Oral-B™ app gives
you the opportunity to use your time more
efficiently, chart your brushing progress and
customize your toothbrush settings (for more
benefits see the Oral-B™ app instructions).
•
Before using the Oral-B™ app make sure
Bluetooth
is activated on your smart phone (for
directions please refer to your smart phone’s
user manual). Your toothbrush will appear in the
list of devices as: «Oral-B toothbrush».
Note: Oral-B™ app functionality is limited if
Bluetooth
is deactivated.
•
Start the Oral-B™ app. You can use the app and
your SmartGuide (i) at the same time.
•
Once you start using your toothbrush by lifting
it off the plugged-in charger (h) or pressing any
button (c)/(d), it automatically connects to
the Oral-B™ app. If no connection has been
established, briefly press the mode button (d) on
your toothbrush handle and wait for a connection.
•
Any further app instructions will be displayed on
your smart phone.
•
Keep your smart phone in close proximity when
using it with your toothbrush handle. Make sure
the smart phone is safely positioned in a dry
place.
Note: Your smart phone must support
Bluetooth
4.0
(or higher) in order to connect to your toothbrush
handle.
Cleaning recommendations
After brushing, rinse your brush head under running
water with the handle switched on. Switch off and
remove the brush head. Clean handle and brush
head separately; wipe them dry before reassembling.
Disassemble the charging unit before cleaning.
Brush head compartment and protective cover are
dishwasher-safe. Both basic charger and SmartGuide
should be cleaned with a damp cloth only (picture 7,
page 17).
96841255_D36_5000_Japan.indd 21
28.05.14 10:17
CSS APPROVED Effective Date 3Jun2014 GMT - Printed 06Aug2014 Page 21 of 28
