Note: Oral-B™ App functionality is limited
if
Bluetooth
is deactivated on your smart-
phone (for directions please refer to your
smartphone’s user manual).
●
Any App instructions will be displayed on
your smartphone.
●
If
Bluetooth
is activated on your handle,
the
Bluetooth
indicator (7) illuminates.
Once the handle is paired with the App,
the Smart Ring (2) flashes briefly.
●
Keep your smartphone in close proximity
(within 5m distance) when using it with
the handle. Make sure the smartphone is
safely positioned in a dry place.
●
The smartphone holder stand (16)
(depending on model) can hold your
smartphone while using. Before use,
make sure your phone fits the stand and
keeps stable (picture C).
Note: Your smartphone must support
Bluetooth
4.0 (or higher)/
Bluetooth
Smart
in order to pair your handle.
Compatible smartphones are listed in
App Store
(SM)
or Google Play™.
Caution: Follow your smartphone’s user
manual to ensure your phone/charger is
designed for use in a bathroom environ-
ment.
Check app.oralb.com for country availability
of the Oral-B
TM
App.
Cleaning recommen-
dations
After brushing, rinse your brush head under
running water with the handle switched on.
Switch off and remove the brush head. Rinse
both parts separately under running water
then wipe them dry before reassembling.
Unplug the basic charger/charging stand
before cleaning (picture
5
).
To be cleaned with a damp cloth only:
charger (9), charging travel case (12), basic
travel case (15) and smart plug (13).
Dishwasher-safe: brush head compartment
and protective cover (10), removable
inlay (12e) of the charging travel case
(picture B3).
Hand wash: beauty bag (14) only with
lukewarm water (30 °C – 40 °C).
Accessories
(depending on model)
Smartphone Holder
●
Before each use, make sure mirror,
suction cup surface (11d) and holding
brackets (11a) are always clean and dry
(picture B1). Use a fuzz-free cloth for
cleaning suction cup surface and mirror.
In particular make sure suction cup
surface and mirror are free from any
contamination (e.g. hair, dust, oil, fuzz,
dirt etc.).
●
Press your smartphone holder (11) just
with enough pressure, centered at nose
level on a sturdy mirror. Then mount the
holder by pressing the lever arm (11b)
towards the mirror until it snaps in
(picture B2).
Note: Only affix on mirror to ensure safe
and correct conditions. For use in bath-
room only. Do not use in automobiles.
●
Always make sure the smartphone holder
is securely mounted on the mirror before
inserting your smartphone. Place your
smartphone (portrait) sideways in
between the holding brackets (11a) by
pressing against one bracket with your
phone and sliding the other bracket to the
side (picture B2). Follow the same proce-
dure to remove your phone again.
●
Adjust the overall position for the required
angle by moving the ball joint of the holder
(picture B3).
●
Once done, remove your phone from the
holder. Take off the smartphone holder by
flipping the lever arm back and pulling the
tab carefully (picture B4 1./2.). Affix
smartphone holder with each use again.
●
The smartphone holder should be cleaned
with a damp fuzz-free cloth only (picture
5
). You may use glass cleaner, alcohol
or similar products (avoid products with
silicone oil). Make sure the surface is
dry and dust free after cleaning. Store in
clean and dry place. If not in use, always
remove your smartphone from the holder.
Note: Smartphone width required for
usage: minimum 58 mm, maximum
83 mm.
Caution:
Small parts may come off, keep
out of reach of children.
Follow your smartphone’s user manual to
ensure your phone/charger is designed for
use in a bathroom environment.
21
90072346_D701_THAI.indd 21
90072346_D701_THAI.indd 21
24.09.21 11:35
24.09.21 11:35
