Braun NTF3000CAV1, Manual, Page: 9 / 37

English
7
To turn off
Press the power button to turn off. Device will also shut off
automatically after 60 seconds of no use.
5
Read temperature
Remove the device and read the
temperature.
For low (no backlight) and Normal (green
backlight) temperature range, you will
hear a single long beep for 2 seconds.
For Fever (yellow backlight) and High
Fever (red backlight) temperature range,
you will hear 10 short beeps.
To repeat
Go to step 3.
6
Temperature taking hints
It is important to know each individual’s normal temperature when they are
well. This is the only way to accurately diagnose a fever. To determine normal
temperature, take multiple readings when healthy.
A child’s normal temperature can be as high as 37.7 °C (99.9 °F) or as low
as 36.1 °C (97.0 °F). Re-measure with a standard digital thermometer for
confirmation. This thermometer displays an oral equivalent temperature
reading, so be sure to note that this unit reads approximately 0.6°C (1°F) higher
than an underarm digital measurement.
Individual must be inside for 30 minutes before taking a measurement.
Note: Individual and the thermometer should be in the same ambient
temperature for at least 10 minutes.
Always hold the thermometer and the forehead steady when taking a reading.
Do not move the thermometer until you hear the final beep. Don’t take a
measurement while or immediately after nursing a baby.
For individual measuring their own temperature, it is recommended to use the
touch option instead of no touch.
Individual should not drink, eat, or be physically active before/while taking the
measurement. Remove hats and wait 10 minutes before taking a measurement.
Remove dirt or hair from the forehead before taking a measurement. The
presence of bangs may cause higher readings. Wait 10 minutes after washing
the forehead area before taking a reading.
0-5 cm
(
0 - 3”
)
Red
Yellow
Green