Braun MultiQuick 7 MQ787, Manual

Page: 6 / 16

6
English
Our products are engineered to meet the highest standards of
quality, functionality and design.
We hope you thoroughly enjoy your new Braun appliance.
Before use
Please read the use instructions carefully and completely
before using the appliance.
Caution
•
The blades are very sharp! To avoid
injuries, please handle blades with
utmost care.
•
Care shall be taken when handling the sharp
cutting blades, emptying the bowl and during
cleaning.
•
This appliance can be used by persons with
reduced physical, sensory or mental capabili-
ties or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the appliance in a safe
way and if they understand the hazards invol-
ved.
•
Children shall not play with the appliance.
•
This appliance shall not be used by children.
•
Cleaning and user maintenance shall not be
made by children without supervision.
•
Always switch off and unplug the appliance
when it is left unattended and before
assembling, disassembling, cleaning and
storing.
•
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
•
Before plugging into a socket, check whether
your voltage corresponds with the voltage
printed on the bottom of the appliance.
•
This appliance is designed for household use
only and for processing normal household
quantities.
•
Do not reach into the filling shaft when the
appliance is plugged in, especially while the
motor is running. Always use the pusher to
guide food through the shaft.
•
· Do not use the appliance for any purpose
other than the intended use described in the
user manual. Any misuse may cause potential
injury.
•
Do not use any part in the microwave.
•
Please clean all parts before first use or as
required, following the instructions in the Care
and Cleaning section.
Parts and Accessories
1 Safety button
2 Pilot light
3 Smartspeed switch / variable speeds
4 Motor part
5 EasyClick release buttons
6 Blender shaft
7 Beaker
8 Whisk accessory
a Gearbox
b Whisk
9 Puree accessory
a Gearbox
b Puree shaft
c Paddle
10 350 ml chopper accessory «hc»
a Lid
b Chopping blade
c Chopper bowl
d Anti-slip rubber ring
11 1500 ml food processor accessory «fp»
a Lid (with gear)
b Coupling for motor part
c Pusher
d Feed tube
e Lid latch
f Food processor bowl
g Anti-slip rubber ring
h Chopping blade
i Kneading hook
j Insert holder
(i) Slicing insert (coarse)
(ii) Shredding inserts (fine, coarse)
(iii) Julienne insert
k French fry disc
Unpacking
Take the unit out of the carton. Remove all pieces of
the packing. Remove any possibly extant labels on
the unit (do not remove the rating plate).
Pilot light
The pilot light (2) shows the status of the appliance, when it is
connected to an electrical outlet.
Pilot light Appliance/operating status
Flashing red Appliance is ready for use
Solid green Appliance is released (switch release button is
pressed) and can be switched on.
Solid Red Early warning about overheating.
Motor slows down, step by step,
till shut off. Let the appliance cool down.
It is ready for use again when the
pilot light flashes red.
If the maximum speed decreases under high load and long
running time you can still finish your preparation, however you
should let the appliance cool down afterwards.
How to Use the Appliance
Smartspeed switch for Variable Speeds
One squeeze, all speeds. The more you press, the higher the
speed. The higher the speed, the faster and finer the blending
and chopping results.
5722113674_MQ787_China_S6-16.indd 6 21.05.19 10:42