4
• The appliance must be kept out of
reach of children.
• Do not hold the motor part (A) nor
the gear attachment (D1) under
running water, nor immerse them
in water.
• Braun electric appliances meet
applicable safety standards.
Repairs or the replacement of
the mains cord must only be done
by authorised service personnel.
Faulty, unqualified repair work
may cause considerable hazards
to the user.
• Before plugging into a socket,
check whether your voltage
corresponds with the voltage
printed on the bottom of the
appliance.
• The appliance is constructed
to process normal household
quantities.
• The mixing beaker (E) is not
microwave-proof.
Description
Motor part
On/off switch
Shaft with blade
Gear attachment (D1)
for whisk (D2)
Mixing beaker
Wall mount
How to operate your
handblender
The handblender is perfectly suited
for preparing dips, sauces, soups,
mayonnaise and baby food as well
as for mixing drinks and milkshakes.
1. Insert the motor part (A) into
the shaft with blade (C) and turn
until it locks.
2. To avoid splashing, insert the
handblender into the vessel first,
only then press switch (B).
You can operate the handblender in
the mixing beaker (E), and just as
well in any other vessel. When
blending directly in the saucepan
while cooking, take the pan from
the stove first to protect your
handblender from overheating.
Recipe example: Mayonnaise
200 – 250 ml oil
1 egg (yolk and white)
1 tbsp. lemon juice or vinegar
Salt and pepper to taste
Put all ingredients into the beaker
according to the a.m. order.
Introduce the handblender to the
base of the beaker, switch it on and
keep it in this position until the oil
emulsifies. Then, without switching
off, slowly move it up and down until
the mayonnaise is well combined.
How to operate your whisk
Use the gear attachment with whisk
only for whipping cream, beating
eggwhites and mixing sponges and
ready-mix desserts.
1. Insert the whisk (D2) into the gear
attachment (D1) until it locks.
2. Then insert the motor part (A)
into the gear attachment (D1)
until it locks.
3. Insert the whisk into the vessel
and only then press switch to
operate it.
For best results:
•
Use a wide vessel.
•
Only whip up to 400 ml chilled
cream.
•
Only whip up to 4 eggwhites.
•
Move the whisk clockwise.
Accessories
(available at your retailer or at
Braun Service Centres; however
not in every country)
CA-4: Powerful chopper, ideal for
meat, cheese, herbs, nuts etc.
HC-4: High-speed chopper, ideal
for herbs, onions, garlic, chilis,
nuts etc.
Cleaning
Clean the motor part (A) and the
gear attachment (D1) with a damp
cloth only. All other parts can be
cleaned in the dishwasher.
However, after processing very salty
food, you should rinse the blade
right away. Also, be careful not to
use an overdose of cleaner or
decalcifier in your dishwasher.
When processing foods with colour
(e.g. carrots), the plastic parts of the
appliance may become discoloured.
Wipe these parts with vegetable oil
before cleaning.
Subject to change without notice.
This product conforms to
the EMC-Requirements as
laid down by the Council
Directive 89/336/EEC and to
the Low Voltage Regulation
(73/23 EEC).
Français
Nos produits sont conçus et
fabriqués pour satisfaire aux plus
hautes exigences de qualité, de
fonctionnalité et de design.
Nous espérons que votre nouveau
préparateur culinaire Braun vous
apportera la plus entière satis-
faction.
Précaution
Lisez complètement et
attentivement le mode d’emploi
avant d’utiliser l’appareil.
• Les lames sont très tranchantes !
• Toujours débrancher l’appareil
avant le montage et le démontage
des accessoires ainsi qu’avant de
le nettoyer et de le ranger.
• Cet appareil doit rester hors de
portée des enfants.
• Ne pas passer le bloc-moteur (A)
ou le système d’entraînement
(D1) sous de l’eau courante;
ne pas immerger ces éléments
dans l’eau.
• Les appareils électriques
Braun répondent aux normes
de sécurité en vigueur. Leur
réparation ou le changement du
cordon d’alimentation doivent
être effectués uniquement par
les Centres Service Agréés
Braun (C.S.A. – voir liste sur le
3615 Braun). Des réparations
effectuées par du personnel non
qualifié peuvent causer accidents
ou blessures à l’utilisateur.
• Avant de brancher cet appareil,
vérifier que la tension correspond
bien à celle indiquée sur le
dessous de l’appareil (bloc-
moteur).
A
B
C
D
E
F
4179358_MR400 Seite 4 Mittwoch, 31. Januar 2001 11:25 11
