Page 5
Lift Terminology
Manual Operation System:
A
manual backup hand pump is
built into the pump module. The
lift platform can be unfolded,
lowered, raised and folded using
the hand pump. Manual Opera-
tion Instructions are provided on
pages 31-33.
Lift Actions and Functions
UNFOLD (Out) - Platform
Unfold:
Unfold is the action of
the platform rotating out and
down from the fully-stowed
(vertical) position to floor level
(horizontal) position when the
UNFOLD switch is pressed.
DOWN - Platform Lower:
Down
is the action of the platform
lowering from floor level position
to fully-lowered (ground level)
position when the DOWN switch
is pressed.
DOWN - Roll Stop Unfold
(Deploy)
- When the platform
reaches the fully-lowered
(ground) position and the DOWN
switch is continued to be
pressed, the outboard roll stop
and the side entry roll stop rotate
downward from vertical position
to ramp position.
UP - Roll Stop Fold (Raise):
When the lift is fully lowered and
the roll stops are in the ramp
position, pressing the UP switch
first rotates the roll stops upward
from ramp position to vertical
position.
UP - Platform Raise:
Up is the
action of the platform raising
Automatic Roll Stop(s):
L955SE and L955U lift platforms
are equipped with a cylinder-
powered outboard roll stop that
provides a ramp for wheelchair
loading and unloading at ground
level. L955SE platforms are
equipped with an outboard roll
stop and a side entry roll stop.
The side entry roll stop is useful in
tight parking situations by reducing
wheelchair caster “turn-out” when
boarding and exiting the platform.
The two roll stops function to-
gether in unison.
Roll Stop Latch:
The spring-
loaded latch locks the outboard
roll stop in the vertical position
when the platform raises above
ground level.
