19
handle (picture
2
). When brushing your
teeth with one of the Oral-B
oscillating-
rotating brush heads
guide the brush head
slowly from tooth to tooth, spending a few
seconds on each tooth surface (picture
3
).
With any brush head start brushing the
outsides, then the insides and finally the
chewing surfaces. Brush all four quadrants
of your mouth equally. You may also consult
your dentist or dental hygienist about the
right technique for you.
In the first days of using any electric tooth-
brush, your gums may bleed slightly.
In general, bleeding should stop after a few
days. Should it persist after 2 weeks, please
consult your dentist or dental hygienist.
If you have sensitive teeth and/or gums,
Oral-B recommends using the «Sensitive»
mode (optional in combination with an
Oral-B «Sensitive» brush head).
Smart Ring features
Your toothbrush is equipped with a Smart
Ring (2) that has various functionalities
indicated via different colors of light:
White (default) = Operating and visual timer
light (choose individual color via Oral-B
TM
App settings)
Red = Pressure sensor light
Blue =
Bluetooth
®
pairing indicator
Timer
You can choose between «Professional» or
«2-Minute» timer.
The «2-Minute» timer signals with a long
stuttering sound and a flashing light of the
Smart Ring (2) that the professionally
recommended 2-minute brushing time has
been reached.
The «Professional» timer signals with a short
stuttering sound and a flashing light of the
Smart Ring at 30-seconds intervals to move
to the next quadrant of your mouth (picture
3
). A long stuttering sound and a flashing
light indicate the end of the professionally
recommended 2-minute brushing time.
The timer memorizes the elapsed brushing
time, even when the handle is briefly
switched off during brushing. The timer
resets if pausing longer than 30 seconds,
briefly pressing the mode button (4) during
pause or placing the handle on the
plugged-in charger.
Note: During the use of special Oral-B
TM
App features, the visual timer light may be
deactivated.
Timer setup:
Your toothbrush comes with the «Profes-
sional» timer activated. To change this,
press and hold the mode button (4) for 2
seconds. Toggle between timer selection by
pressing the on/off button (3). Confirm
selection by pressing the mode button.
•
2 LED’s illuminated indicate «2-Minute»
timer
•
4 LED’s illuminated indicate «Professio-
nal» timer
Note: You can also set/advance the timer
functionality via Oral-B
TM
App.
Pressure sensor
If too much pressure is applied, the Smart
Ring (2) will light up in red, reminding you to
reduce pressure. In addition the pulsation of
the brush head will stop and the oscillation
movement of the brush head will be reduced
(during «Daily Clean», «Pro Clean» and
«Sensitive» mode) (picture
3
).
Periodically check the operation of the pres-
sure sensor by pressing moderately on the
brush head during use.
Brushing modes (depending on model)
Your toothbrush offers different brushing
modes indicated on the brushing mode
display (6) on your handle («Daily Clean»
mode does not illuminate on the brushing
mode display):
«Daily Clean»
– Standard mode for daily
mouth cleaning
«Pro Clean»
– For an extraordinary
clean feeling (operated
with a higher frequency)
«Sensitive»
– Gentle, yet thorough
cleaning for sensitive
areas
«3D White»
– Polishing for occasional
or everyday use
«Gum Care»
– Gentle massage of
gums
«Tongue Clean»
– Tongue cleaning for
occasional or everyday
use
91429697_D701_V3_China_S6-28.indd 19
91429697_D701_V3_China_S6-28.indd 19
16.03.17 08:38
16.03.17 08:38
CSS APPROVED Effective Date 20Mar2017 GMT - Printed 06Sep2017 Page 18 of 27
