7
In case of overheating/motor blocking, the red pilot light flashes/shines constantly and
the motor turns off. Wait for the appliance to cool down and the red light to turn off
before switching on again.
Switch (4)
Press the switch centre (I) to turn the appliance on and off.
Additional switch functions depend on the head attached:
Epilation head (2)
Left rotation
Right rotation
Brush attachment* (7,8)
MicroVibration head* (9)
Speed 1
Speed 2
* Both the Brush attachment and the MicroVibration head are provided with a
treatment timer that beeps after 20 seconds to show that it is time to move on to the
next face zone (left cheek, right cheek, fore head).
Travel lock
Press the switch centre (I) 3 seconds to lock the appliance. A beep confirms that the
travel lock is activated. To unlock, press the switch 3 seconds. 3 beeps will sound when
your unlocking attempt failed. Try again or simply connect the appliance to the mains.
Using the epilation head (dry use only)
•
The small, precise epilation head removes even the finest facial hairs from the roots.
Before use, make sure your skin and the epilation head are thoroughly clean.
•
Hold the appliance with the tweezers against a section of skin that you keep
stretched with your free hand. Carefully guide it with gentle pressure against the
direction of hair growth. Do not press too hard as this may lead to skin injury. To
stretch the upper lip area, use your tongue to push from below.
•
To relax the skin, we recommend applying a moisturizing cream after epilation. When
epilating for the first time, it is advisable to epilate in the evening, so that any possible
reddening can disappear overnight.
General information on epilation
All methods of hair removal from the root can lead to skin irritation (e.g. itching,
discomfort, reddening) depending on the condition of your skin and hair.
This is a normal reaction and should quickly disappear, but may be stronger when you
are removing hair at the root for the first few times or if you have sensitive skin.
In general, skin reactions and the sensation of pain tend to diminish considerably with
the repeated use. If, after 36 hours, the skin still shows irritation, we recommend that
you contact your physician. In order to minimise the risk of infection or inflammation
due to penetrating bacteria (e.g. when sliding the appliance over the skin), thoroughly
clean the epilation head before using it.
91283802_FaceSpa_Pro_911_921_NA.indd 7
25.10.17 13:00
