Braun cruZer 6 BODY, User Manual

Page: 20 / 24

21
Plug the charger (8) into an electrical outlet. Place the cruZer
body onto the charger. The pilot light (7) indicates that the
cruZer body is connected to an electrical outlet.
Charging time is approximately 12 hours. Cordless operation
time is up to 50 minutes.
Battery maintenance
In order to maintain the capacity of the rechargeable
batteries, we recommend that you unplug the charger and
discharge the cruZer
body by regular use at least every
6 months.
How to use the cruZer body
Make sure that you always keep your skin stretched when
shaving or trimming.
The cruZer
body is not intended for removing facial hair or
scalp hair.
This appliance is suitable for use in a bath or shower.
• Trimming («1») :
Trimming on the skin / contour trimming
For trimming precise lines and contours, just use the
trimmer (2) (picture a).
Press the on/off switch (6) to turn on the cruZer body .
Stretching your skin, carefully move the trimmer against
the direction of hair growth.
For this function, you can use Gillette shaving foam or
gel.
Using the trimming combs (1a) – (1c)
For best results use the trimming combs on dry hair only.
Do not use shaving foam or gel for this application.
Whenever hairs build up in front of the comb, remove
them.
Trimming on the skin in sensitive areas (e.g. genital area)
with the «sensitive» attachment (1a)
For trimming in sensitive areas and improved skin care,
you should use the «sensitive» attachment (1a) (picture b).
Snap it onto the trimmer (2) as shown until it clicks into
place. Press the on/off switch (6) to turn on. Gently move
the cruZer
body against the direction of hair growth with
the comb tips pointing forward. In sensitive areas take
special care that the skin is always stretched to avoid
injuries.
92285736_cruZer6_body_Japan.indd 21 92285736_cruZer6_body_Japan.indd 21 10.05.12 12:01 10.05.12 12:01