8
Cleaning
Never use water to clean the shaver.
For easy cleaning after each shave, switch the shaver off.
Press the release buttons to lift the shaver foil (do not
remove the foil completely). Switch on the shaver for
approx. 5–10 seconds so that the shaved stubbles can
fall out.
Then remove the shaver foil and tap it out on a flat surface.
Using the brush, clean the inner area of the pivoting head.
However, do not clean the shaver foil nor the cutter block
with the brush as this may damage them.
Keeping your shaver in top shape
About every four weeks, clean the cutter block with Braun
cleaning agents. Put a drop of light machine oil onto the
long hair trimmer and the shaver foil.
Replacing the shaving parts
To maintain 100% shaving performance, replace your foil
and cutter block at least every 18 month or when worn.
Change both parts at the same time for a closer shave
with less skin irritation.
(Shaver foil (2) and cutter block (3): 8000 series)
Tips for the perfect shave
• We recommend that you shave before washing, as
the skin tends to be slightly swollen after washing.
• Hold the shaver at right angles (90°) to the skin.
Stretch your skin and shave against the direction of
beard growth.
• To maintain 100% shaving performance, replace
your foil and cutter block at least every 18 month or
when worn.
fix
on
of
f
on
of
f
oil
fix
on
of
f
8000
S e r i e s
360
°
Complete
Complete_8915_S4 Seite 8 Dienstag, 31. Mai 2005 12:31 12
