Page 3
For technical questions, please call 1-888-866-5797.
Item 63990
Charging Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Insert the end of the Adaptor cord into the
Charging Jack, located in one of the handgrips.
2. Plug the AC/DC Adaptor into a 120V outlet
or plug the Cigarette Lighter Adaptor into any
12V DC outlet in an automobile, boat or RV.
3. The Charge Light Indicator will light up Red
during charging. After approximately 4.5 hours
the Charge Light Indicator turns Green,
indicating the Work Light is fully charged
and ready for use. Unplug the Adaptor.
NOTICE:
Do not leave the Battery in a discharged
state. Charge the Battery every 3 months if the
Work Light is not in use. This will keep the Battery
from wearing down and add to its life. Do not charge
the Work Light at temperatures below 40° F.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
NOTE:
Before using Work Light for the
first time, fully charge the Battery.
1. Press one of the buttons once to turn
on the light in economy mode.
2. Press one of the buttons again to switch
the light to maximum brightness.
3. To hang the Work Light, access the magnetic
stretch cord attachment end caps by unscrewing
the caps located on the end of each handgrip.
Use the magnetic ends to attach the Work Light
to a vehicle or other metal object. The magnetic
end caps also contain fold-away attachment
hooks for additional hanging options.
4. Press one of the buttons a third
time to turn the light off.
5. When finished using the Work Light,
store indoors away from children.
NOTICE:
Do not open the housing, there
are no user-serviceable parts inside.
