Braun 5732, Owner'S Manual

Page: 9 / 10

9
Shaving
Remove the foil protection cap (1). Activate the on/off switch
(6). The fl oating foil frame automatically adapts to your skin
surface for a close, smooth shave.
For pre-shaving after a few days of not having shaved, use
the long hair trimmer (4) to pre-cut long hairs. For a close,
smooth shave, fi nish with the foil.
Trimming
Push out the long hair trimmer (4). It allows controlled
trimming of moustache and sideburns. It evenly cuts and
trims larger areas: Ideal for shaping sideburns, mousta-
ches and partial short beards.
Frequent use of the long hair trimmer may reduce the battery
capacity.
Tips for the perfect shave
For best results, Braun recommends you follow 3 simple
steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles (90°) to your
skin.
3. Stretch your skin and shave against the direction of
your beard growth.
Cleaning
This appliance is suitable for cleaning under an open
water tap.
Warning: Detach the hand-held part from the power
supply before cleaning it in water.
Regular cleaning ensures better shaving performance.
Rinsing the shaving head after each shave under running
water is an easy and fast way to keep it clean:
Switch the shaver on (cordless) and rinse the shaving
head under hot running water (b). A natural based soap
may also be used provided it contains no particles or
abrasive substances. Rinse off all foam and let the
shaver run for a few more seconds.
Next, switch off the shaver, remove the shaver foil and
the cutter block. Then leave the disassembled shaving
parts to dry.
If you regularly clean the shaver under water, then once
a week apply a drop of light machine oil onto the long
hair trimmer and shaver foil.
Alternatively, you may clean the shaver using the brush
provided (c):
Switch off the shaver. Remove the shaver foil.
Using the brush, clean the cutter block and the inner
area of the shaver head. However, do not clean the
shaver foil with the brush as this may damage the foil.
•
•
•
•
•
99562745_Cruzer_Z20_China.indd 9 99562745_Cruzer_Z20_China.indd 9 26.03.2010 13:11:25 Uhr 26.03.2010 13:11:25 Uhr