Page 6
For technical questions, please call 1-888-866-5797.
Item 56354
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the On/Off Switch of the tool off before performing any
inspection, maintenance, or cleaning procedures.
Cleaning, Maintenance, and Lubrication
1.
BEFORE EACH USE,
inspect the general
condition of the tool. Check for:
• loose hardware,
• damaged USB cable,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2.
AFTER USE,
wipe external surfaces
of the Light with clean cloth.
3. Keep charging leads, on both Light
and Charging Base, clean.
4. The lens may be removed for cleaning by
grasping the sides of the retention ring
and rotating it counter clockwise.
a. Remove the ring and carefully remove lens.
b. Clean lens with mild detergent
soap using a soft cloth.
c. Dry thoroughly and carefully place lens
back onto the light, flat side down.
d. Place retention ring over lens and
turn clockwise until tight.
5. Store the Light mounted in its Charging Base
in a dry, indoor area out of reach of children.
Retention
Ring
Lens
