4. Attach retaining plate [4].
•
The side or bottom connec- tions can be selected.
•
The meter must always been installed in an upright position and the seal on the
counter cap must always be on top.
5. Remove sealing plugs and screw in screwed plugs [6]
with cylin- drical threads.
•
Do not mix up the inlets and outlets!
•
The lip sealing rings supplied [2] must be used for sealing the screwed pipe
connec- tions!
6. Attach oil meter [1] to the mounting plate [4] using the clamps [3].
7. Tighten up the screwed connec- tions. Thereby hold the connecting piece [7] still with an
SW 19 spanner.
