5. Placing the IR Receiver
Peel the backing paper. Place the IR receiver
into desired position.
Make sure nothing will obstruct the transmission
from where the TV will be viewed.
Do not plug into the power outlet until
it is ready to be operated.
11
Do not open the electrical cover please.
12
6. The Remote Control Operating Instructions
Remote control operation instructions
remote control
Buttons function instructions
Stop button
OK
Memory button1.Press and hold for 5 seconds, the buzzer will sound twice beep beep, The memory
is saved as location 1.
Memory button2.Press and hold for 5 seconds, the buzzer will sound twice beep beep, The memory
is saved as location 2.
OUT button, downward movement
IN button, upward movement
+
To recall the button(location 1). Press and release button, and then press button,
The TV ceiling mount will automatically swivel to the location1 after the buzzer sounds once.
+
To recall the button(location 2). Press and release button, and then press button,
The TV ceiling mount will automatically swivel to the location2 after the buzzer sounds once.
Follow the Key function instructions below to operate.
STEP 1:
When powered, the buzzer sounds once beep, the TV
ceiling mount will be in standby state. The TV ceiling mount is
installed on a flat surface by default, and has a 0
°
~75
°
continuous adjustable tilt.
STEP 2:
Press and release
OK
to return the TV ceiling mount
flat against the ceiling surface and hear one beep from the
buzzer, the system will then enter a working condition.
(Please reset the tilt angle if you install the TV ceiling mount on
a pitched surface. Press and hold
for 5 seconds and
repeat four times. The system will automatically find the
position without human intervention. Once this is done, the
system will automatically stop at the maximum position.
Please
ignore this step if this mount is not intended for
installation on a pitched surface.
)
NOTE :
No-load running prohibited.
I
G
Manual mode
•
•
In any position (but the minimum position against the ceiling), when manually push up the TV ceiling mount
over a distance. The TV ceiling mount will automatically return back to the minimum position against the
ceiling.
In the minimum position, when manually push up the TV ceiling mount over a little distance. The TV ceiling
mount will automatically unfold at the maximum position.
