- 9 -
2.2.4
Lift the antenna to a tower
Lift the antenna to a tower with a rope through the lifting hole as shown in figure 6. In order to avoid the
antenna rotation, you need to tow the antenna with another rope as shown in figure 6.
`
Figure 6 - Lift the antenna
Attention: To avoid falling and damage, please make sure the rope is tighten before lifting. During
the installation, please protect the antenna from hitting of other objects due to the wave of the antenna
resulting from the wind or other causes.
2.2.5
Install the antenna to the mounting pole
Lift the antenna on the anti-slip corner bracket of the mounting pole. Diameter ranges of pole for this
Mounting Bracket:
Φ
115 mm. Install the antenna to the mounting pole with 2 U-bolts, 8 nuts (M14), 4 Flat
washers. Mounting assembly must be clung to the anti-slip corner bracket. Moreover, the channel steel
direction should be 45° between the antenna directi ons as shown in figure 7. Don’t fasten all the nuts
now.
Rope
Lifting hole
Rope towing antenna
