Extinguishing the Burner
•
Never try to extinguish the flame using water. This is an explosion hazard.
•
To extinguish the fire, place the snuffer tool over the burner baffle. Keep it in place at least 5 minutes
to ensure the flame has been completely extinguished.
•
Allow the burner to cool for at least 30 minutes before touching it with bare hands.
•
If alcohol remains in the burner, leave the snuffer tool in place to keep the fuel from evaporating.
Maintenance and Care
•
Only clean the surface of the burner after it has fully cooled down.
•
Do not use abrasive cleaners, scrubbing powder or similar cleaners as they can cause damage.
•
To avoid spilling, make sure the burner is empty of alcohol before cleaning.
•
To clean, use a wet clean cloth with water and a mild dish detergent on the surface of the stainless
steel if needed (do not get soap or water inside the burner), or wipe with alcohol to remove tarnish
stains. You can also use the polish pad, rubbing with the grain of the metal to remove tougher stains.
•
Do not place fragrance inside a burner – fragrance may only be used with Brasa Shadow Lanterns.
Further Safety Instructions
•
If alcohol is spilled on the burner, wipe it up immediately using a soft absorbent cloth. Wash out the
cloth afterwards with clean water.
•
Allow the burner to cool at least 15 minutes before refueling.
•
For safety reasons, this burner can only use denatured alcohol.
•
Do not use the burner if it shows visible damage.
•
Do not move the burner while it is burning.
Burn Time
•
Burners will burn for approximately 2+ hours when filled to maximum capacity with a high quality bio
ethanol fuel. Using a low quality fuel or burning the burner during windy conditions outdoors may
decrease fuel efficiency.
•
Oval Burners provide approximately 7,500 BTU thermal output.
•
Round Burners provide approximately 3,500 BTU thermal output.