Branson 6640C Operator'S Manual Download

Page: 160 / 167

• • •

160

ELECTRICAL SYSTEM

Situation

Inspection item

Solution

The headlamp will not turn

on.

Is the bulb burnt out?

Replace the bulb.

Is the fuse burnt out?

Replace the fuse.

Is the cable separated from the socket?

Inspect cable.

The direction indicator

lamp will not operate.

Is the bulb burnt out?

Replace the bulb.

Is the fuse burnt out?

Replace the fuse.

Is the flasher unit defective?

Replace the flasher unit.

Is the contact in bad condition?

Inspect and clean the grounding and termi

nals.

The lamps will not turn on. Is the bulb burnt out?

Replace the bulb.

Is the fuse burnt out?

Replace the fuse.

Is the contact of the cable in bad condition?

Inspect the cable and secure the contact.

Is the switch defective?

Replace the switch.

Is the grounding in bad condition?

Connect the grounding cable securely to the

body.

Is the battery discharged?

Charge the battery.

The horn does not sound.

Is the fuse burnt out?

Replace the fuse.

Is the horn switch contact in bad condition?

Inspect the horn switch.

TROUBLESHOOTING

6640C OPERATORS MANUAL (012612).indd 160

1/30/2012 2:31:10 PM

Summary of Contents for 6640C








































































































































































Search results

Summary of Contents for 6640C

Reviews:

Related manuals for 6640C

Brands by name

Popular brands

Branson 6640C, Operator'S Manual

Search results

Summary of Contents for 6640C

Reviews:

Related manuals for 6640C

Brands by name

Popular brands