Support Jack Operating Manual
* For more information on Mucasol
®
lab detergent, contact BrandTech
®
Scientific at 888-522-2726.
6. MAINTENANCE
Stainless steel support jacks are constructed from Type 304 stainless steel and POM for
long life, even in corrosive environments. Handwheels are made from PF31 phenolic.
Anodized aluminum support jacks (blue models) feature the same 304 stainless
steel/POM lift mechanism as the stainless steel jacks, but feature decks and bases
constructed of anodized aluminum for economy or different chemical compatibility.
Epoxy-coated aluminum support jacks (green models) feature the same 304 stainless
steel/POM lift mechanism as the stainless steel jacks, but feature decks and bases
constructed of epoxy powder-coated aluminum for economy or different chemical
compatibility.
To ensure optimal performance from your support jack, please adhere to the following
guidelines.
• Clean support jacks as necessary with a mixture of warm water and any standard
household or laboratory stainless steel cleanser, such as Mucasol
®
lab detergent*.
Support jacks should be cleaned prior to autoclaving. After cleaning or autoclaving,
always apply a light coat of any standard household lubricant to the lift-screw.
• Always wipe off any chemicals spilled on support jacks as quickly as possible.
• Never clean your support jack with an iron brush, steel wool, or pad. This can
damage the surface, and increase risk of corrosion.
• Avoid exposure of your support jack to chemicals incompatible with the materials
of construction. Clean promptly after any exposure to incompatible chemicals to
minimize damage.
• Because the rollers are manufactured from POM, immediately clean up any spills of
reagents that may react adversely with POM.
