Brandt VF 320, Operating Instructions Manual

Page: 20 / 29

Présentation de votre lave-vaisselle
39
Selecting a washing programme
Check that the power
cable is plugged in the soc-
ket and that the water tap is open.
The meaning of the
programme symbols is
shown on the adhesive
label included in your docu-
ments pouch. If you so wish,
you can stick this on the inside
of the dishwasher door.
The following indicator lights light
up :
“ICS
AUTO
-
PROGRAMME
” , “Soak”
“Intensive” , “Eco” or “Fragile” ,
shows the programme selected.
To change the selection, press a
different programme button.
Press the “ On / Off ” button to
switch the machine on.
Refer to the Programmes table
on the following pages to deter-
mine the best programme for the
amount of washing up and how
dirty it is.
Press the button for the pro-
gramme you have selected
Présentation de votre lave-vaisselle
38
Loading the dishwasher
① ①
② ②
Adjusting to the HIGH POSITION :
Gently lift the basket until you hear
the first “Click ” on both sides.
Adjusting to the LOW POSITION:
Lift the basket at the back on both sides
( “Click” ) and then gently lower it.
Depending on the model: when loading large plates into the lower
basket, you may have to adjust the height of the upper basket. This
can be done even when the basket is full.
Check that the slides are both at the same height and that the basket is
level.
Place glasses, cups and bowls facing downwards.
The upper basket
This basket is designed in particular to
take: glasses, cups, ramekins, small
salad bowls, bowls, saucers, etc.
Arrange the items methodically to save
space (a row of glasses, cups, bowls,
etc.).
You can also place cups, ladles, etc. on
the foldaway brackets as well as in a
cutlery basket.
Arrange stemmed glasses along the
wire shelf.
The wire shelf enables you to load cut-
lery of any size, arranging it either in
the lower or upper basket by removing
the cup-holding shelves.
On / Off