22
Building the appliance in under a
worktop
The dimensions of the recessed installation area must
correspond with those indicated in the figure.
The appliance could be inserted between two units
(a) or as an end unit (b).
S.I.004
600
550
600
600
820 - 870
b
a
Important
It must be possible to disconnect the appliance
from the mains power supply; the plug must
therefore be easily accessible after installation.
S.I.005
1. Fasten the side panel to the rear of the appliance
with the fixing brackets.
D326
SUPER.
INFER.
UPPER
LOWER
2. Fasten the appliance to the worktop or the sides,
applying the sealing strip between the appliance
and adjacent cabinet using the fixing brackets (E).
D319
E
E
SUPER.
INFER.
UPPER
LOWER
S.I.006
30
3. The appliance is equipped with adjustable support
feet. To adapt the appliance to the height of the
installation area (max 870 mm), screw in, or screw
out the feet situated in the four bottom corners.
PR266
A
B
C
D
4. Separate parts A, B, C, D as shown in the figure.
