11
• The oven must be set on a work surface at least 85 cm above floor level.
• Place the oven on a flat and horizontal surface, away from any source of heat
or steam. *For certain models, to ensure the stability of the microwave oven,
the front left foot is adjustable (5 positions). Turn it to raise or lower the
appliance.
•Make sure that air may circulate freely around the oven.
Location
INSTALLATION
Electrical connection
*
Before connection
For countertop models, leave sufficient
space around the oven :
- 5 cm between the sides of the oven
and any walls or objects
- 20 cm above the oven
- 10 cm behind the oven.
• Allow nothing to obstruct the ventilation louvers at the back of the appliance.
• Certain ovens are designed for flush-fitting. To obtain the corresponding kit, consult your dealer.
• Make sure the electrical plug will be accessible after installation.
• C
heck whether your oven has suffered any damage during transport (deformed door or
door seal, etc.). If you see any signs of damage, contact your dealer before use.
• Verify the power voltage. If there is a PERMANENT undervoltage (200-210 volts), consult your
electrical installer.
• Your installation must be protected by a 16 Amp thermal fuse.
• It is mandatory to use a power point with a
ground terminal
, connected in accordance with
current safety regulations.
• In your electrical installation, provide a device that is accessible to the installer, capable of
separating the appliance from the mains power and whose contact opening is at least 3 mm
at all of the poles.
• Never operate the oven if the supply cord and/ or its plug are damaged.
In case of damage,
call in a specialised technician trained by the manufacturer.
5 cm
20 cm
10 cm
5 cm
Summary of Contents for MM210
Page 7: ...99624791 07 02...
