29
Electrical connection
For your own safety, you must
comply with the instructions
given below.
We cannot be held responsible for
any incident caused by a faulty
electrical installation.
Recommendations for the elec-
trical installation of your appliance:
- Do not use extension leads,
adaptors, or socket boards.
- Always make sure your circuit is
earthed.
- If you have to change the supply
lead, we recommend that you
exchange it for a lead of the same
type. You can get this from our
after-sales service
- The socket must always remain
accessible, yet be out of the reach
of children.
If you have any doubts, contact
your installer.
Carry out the initial cleaning
(See section on "
Installation of
your appliance
") before connec-
ting your appliance to the electri-
cal supply.
Disconnect your appliance prior to
carrying out any maintenance ope-
ration. Grasp the plug directly,
rather than pulling on the electric
lead.
The electrical installation must com-
ply with Standard NF C *15-100,
in
particular concerning the earth
.
Three-core flex 3x2.5 mm², 230V
connected to:
- a 20A supply 230V-50Hz
- an ELCB and an individual fuse (10
or 16A depending on the model)
- a 16/20A socket with two poles
+ earthed
socket
Your appliance is compliant with European Directives
CEE/73/23 (low voltage directive), CEE/89/336 (electromagnetic
compatibility) and CEE/96/57 (energy efficiency) as well as
their modifications.
How to carry out your initial installation
GB
99633601_B.qxd 28/04/2004 16:01 Page 29
