Brandt BWD 58 H 2 DW, User Manual

Page: 19 / 25

19
Adding or removing laundry after a programme has started.
1.Press .
2.Open the door.
3.Add or remove items as required.
4.Close the door .
5.Press .
Changing a running programme
Once a programme has started, you cannot change it to another
programme. You will need to cancel the current programme before
you can select a new one.
1.Press to cancel the running programme.
2.Press again.
3.Select another programme and start it by pressing .
Delayed start
The drying cycle can be delayed by up to 24 hours. To enable this function,
select the desired programme, press the delayed start button and then
press .
1.Repeatedly press to increase the delay time by 1 hour, up to 24 hours.
The display will show the delay time.
.
2.Press to confirm.
The symbol will flash on the display.
.
3.Once the delay time has elapsed, the selected programme will start.
To cancel the delayed start
If you want to cancel the delayed start and start the programme, switch
off the dryer and then switch it back on.
Signal function
You can use this function to turn on or off the sound made when pressing
the buttons or turning the programme selection knob.
You can activate this function by pressing after turning on the
appliance. The signal indicator light will illuminate.
You will hear the buzzer:
-at the end of the cycle;
-when you press any button or turn the programme selection knob.
To deactivate this function, press again. The signal indicator light
will go out.