13
Unplug the appliance before carrying out any dismantling or assembly operations.
1.
Turn over the Jar (3)
2.
Put down the sealing ring (5) into the jar base (4)
3.
Install the blade unit (6) into the sealing ring
4.
To attach the blade unit, you have to screw it by turning anti-
clockwise: for this operation you can used the spanner(9)
delivery for help you.
5.
Mount the jar onto the cup base unit (7) and tune the cup base unit, and turn clockwise until jar
locks into place.
6.
Mount the measure cup (1) onto the lid (2)
7.
Secure the lid onto jar and press down (2)
D.
Installing the blender
1.
Place the assembled blender on a flat, stable surface.
2.
Before plugging in the blender, make sure the jar is correctly fitted and in place on the motor
base.
3/ USING YOUR APPLIANCE
A.
Operating instructions
Connect the blender to the power supply. When the appliance is plugged into the wall socket, you
may adjust the rotation speed or make a quick selection, depending on your requirements:
•
Speed selection: Select the speed by turning the control knob on “1” or “2” in function of the
consistency of the food you wish to blend. Turn the control knob to position “0” to switch the
appliance off.
•
Clean / Pulse: If you wish to blend food with short pulses, switch this control knob alternately until
you obtain the desired mixture. This function can be used for cleaning the jar. To do this, pour water
and a little cleaning product into the jar.
(The switch does not permanently engage in the ‘PULSE’ setting. You have to hold the switch in the
‘PULSE’ setting or turn it repeatedly into the ‘M’ setting)
•
Ice Crush mode: If you wish to crush glass for cocktails for instance; push the button with short
pulses. As the Pulse Mode you have to hold the button for operate this mode.